Blog

Product Tips & How To Guide

Practical advice from our counter to your rig — soft washing, equipment care, and chemical safety done right.

Contractor inspecting pressure washer hoses and spray equipment on a driveway

Articles

Quick Tips

Soft Washing

Low-pressure cleaning is the right way to wash roofs, siding, and painted surfaces without blasting off granules or forcing water behind trim.

  • ●Mix sodium hypochlorite to 1–3% strength for most house washes; stronger is not always better.
  • ●Add a surfactant so the solution clings to vertical surfaces and does not run off before it works.
  • ●Wet plants and grass before, during, and after the application to protect landscaping.
  • ●Let the mix dwell 5–10 minutes, then rinse with low pressure from top to bottom.

Equipment Care

A little routine maintenance keeps your pump, unloader, and hose reels turning season after season and saves you from a dead rig on job day.

  • ●Flush the pump with clean water after every bleach job to prevent corrosion and seal damage.
  • ●Check the unloader for bypass pressure issues if the machine surges or the trigger feels stiff.
  • ●Store hoses loosely coiled and out of direct sunlight to avoid kinks and UV cracking.
  • ●Winterize by running RV antifreeze through the pump if temperatures drop below freezing.

Chemical Handling

Bleach and degreasers get the job done, but they deserve respect. Handle, store, and transport them safely every single day.

  • ●Wear gloves and eye protection whenever mixing or transferring chemicals.
  • ●Label every tank and jug clearly; never mix bleach with acids or ammonia.
  • ●Keep bleach out of the sun and away from metal fittings that can corrode.
  • ●Keep a spill kit handy and know how to neutralize small bleach spills quickly.

Have a question we did not cover?

Stop by the store or give us a call — our team has held the wand and can walk you through whatever you are troubleshooting.

Need help picking the right part?

Stop by the store in Gonzales or give us a call — we'll get you set up with exactly what your rig needs.